Apply polish to cloth or pad - Apply a small amount of polish to your cloth or foam pad. Spread the polish - Dab the polish around the area you're working on (it's best to do a little bit at a time) and gently spread it around. Start working in the polish - Some people like to use circular motions, and some like to go up and down then left and right, but use your cloth or pad and work the polish into the paint, following the contours of the car. Keep going! - Keep working in the polish until it's almost clear. Leave the polish to cure if required - Some polishes need to be left on the car - check the packaging to see whether you need to do this. Buff off the polish - Using a clean, very soft cloth (microfibre towels are great for this), buff off the polish residue, making sure to keep folding the cloth to use the clean areas.

It's possible to get much faster results using an electric polisher. If you decide to do this, apply your polish to the machine's pad and gently spread it around the area you're working on, then turn on the polisher and use a slow to medium speed to work the polish. Keep a light pressure and keep the pad level - you don't need to 'scrub' the paint, just let the polish do the work! Beware that it is possible to damage your paint with a machine polisher, but with some care and attention, you can really quickly get a great finish on your car or motorbike.

Snow foam in their simplest Foam are a high foaming detergent, the reason for the extra foam - apart from it looking quite dramatic, is that it allows the active cleaning component to stay in contact with the surface giving a longer dwell time, that leads to higher cleaning rates from the detergent. Sounds pretty straightforward right? Well here is where it all goes kind of down hill, whilst the Snow foam that you use is pretty self explanatory the device/method of applying it is more than often the biggest pit fall for many who simply don’t get the results they desire from a Snow foam.

Transportation vehicles have a large number of areas beyond the reach of brushes. Therefore it is important to note that the high-pressure washing features in this system play a major role in the cleaning processes. Additionally, the high-pressure water jets remove sand and other coarse particles, which could potentially scratch finishes of vehicles during the brush stage of the wash. The Ultima high pressure arch's use both the conventional flat spray and advanced solid stream pattern for the maximum cleaning impact and efficient washing.

Vertically sweeping side jets clean the sides from sills to roof. For enhanced cleaning, they oscillate up and down so that they overlap each other. Similarly, the high-pressure water jets on the rotary head oscillate sideways. High-pressure water jets, from nozzles situated in the rotary head, clean the vertical and horizontal surfaces from bumper to bumper. Rotational motions of the head, together with the lateral oscillating pattern, direct the far-reaching water jets into vehicle recesses that are beyond the reach of brushes.

For production of color foam car wash detergent foam ( shampoo foam ) contains nonionic and anionic surfactans for cleaning agent and foaming agent, phosphate and phosphonate derivatives, alkaline ingredients for adjusting mixture for hih alkaline and solvents for strenghten cleaning. For the production, there is need usable and tried a formulation, raw materials and mixing tank. How raw materials to be used, how quantities to be used and how ingredients usage rankings, you should look into this formulation.